Tire Changing, what fun

OK so yesterday I pulled the wheels from the FJR and tossed them in the back of the Excursion.

Today we broke in the new No-Mar Tire changer.

Dad had already unpacked it an put it together by the time I go there. We have it temporarily mounted to a 3/4 sheet of plywood and that worked out pretty well.

If we ever figure out a permanent home for it we’ll permanently mount it 😉

We started with the rear tire and took our time. I brought my laptop so we could watch the DVD as many times as needed.

DSC 7094

And we needed too…

This tire changing thing is an art, that’s for sure, there are tricks and stuff to getting it just right.

We struggled quite a bit with the rear. Mostly because (a) we didn’t use enough lube, and (b) the FJR’s rear rim is very shallow. But none the less we did get it off without breaking any knuckles nor a single cuss word was uttered. That’s a good thing.

The front came off and went on very very easily.

So far this no-mar thing is a good thing, today I saved between $50 and $100 by mounting my own tires. It won’t take too many times to cover this cost of the machine 🙂

DSC 7092

Time for tires…

I ordered up a set of Avon Storms to replace the original Metzler Z6’s about a month ago, but the weather has been too poopy to get out there and get anything done.

I did get the bike out Friday and commuted to work, made a lunch run, and made it home.

I got 7857 miles out of these original tires, although you can certainly say I pushed that rear a little far. It wasn’t showing treads when I left work Friday and I almost went for a ride today. Good thing I didn’t.

Dad purchased a no-mar tire change for us since we tend to go through some tires and paying someone else to change them is getting old.

First order of business, remove the wheels from the bike. I put the FJR on the center stand then with the help of my daughter Maggie, I ‘rocked’ the center stand up on two 2×4’s to get more clearance.

DSC 7084

 

I then removed the rear tire first. Paying special attention to the ABS sensor. I found an old sock in the tool shed and put it in that to keep it covered and off of any other metal parts.

After removing the rear tire I pushed down on the bike and had her stick a 2×4 on top of the two stacked 4×4’s under the header to get the front off the ground.

DSC 7078

 

I needed to put the front ABS sensor in something and couldn’t find another sock so I used a plastic bag that I had laying around. That should work just as well.

Here are the stock Metz’s after 7857 miles.

DSC 7090

 

There’s still some life in the front, but I’m going to replace them both.

The back is SHOT… Ack!

DSC 7088

 

More fun tomorrow with the No-Mar as we figure out how to get that thing mounted to something… Dad was right we should have just bought the hitch mount thing and I may order that in the future.

 

2007 Polar Bear Ride

Gar started this mess two years ago and it was supposed to be an annual thing.

I don’t know what happened last year. The first year there was snow on the ground but it wasn’t as cold as today.

When I lift the house this morning it was a tepid 42 degrees. It had to warm up right? Yesterday the weatherman (first mistake was believing them) was that it would be a high of 50.

It just got colder as the day wore on.

DSC 5613

We hooked up at the gas station in front of the drawbridge inn around 10am. Pat then took us on a quick ~30 mile ride around the Rabbit Hash area. We stopped at the country store (same as last time) and warmed up by the stove.

DSC 5615

Then off to the Hofbrau House for some good eats. My hands nearly froze on the ride to the Hash, but then I wised up and put on my heated gloves. Once they were in place all was well. I think everyone had electrics so no one froze to death.

We left the hash and headed straight towards the Hofbrau for some good eats.  Good ride, good time, good company, and good food.  Can’t ask for any better than that.
For the ride home it was a balmy 36 degrees and the wind was brutal, but I was as toasty as could be.

Thank you Mr. Gerbings 😉

So when is leather not leather?

When it’s plastic that’s when.

OK so it starts like this:

I buy and sell things on ebay from time to time. Yes, it’s true, you can get decent deals on some things on ebay. But you have to know what you’re looking for and be patient. There is a lot of ‘crap’ on ebay.

I do some pretty routine searches for things like, FJR1300 for things for my motorcycle. Occasionally I’ll look for other motorcycle gear too. I ended up getting a great deal on a used Joe Rocket Jacket. A $250 jacket for $65 bucks plus shipping was $80 and it was like new.

So once in a while I’ll search for something like “Yamaha Leather” or “Yamaha Leathers” or what not.

Well, one day this turned up:

DSC015471

Now, I need another jacket like I need a hole in the head. But this is a Valentino Rossi replica GO!!!!!!!!!! ‘Leather’ jacket with CE armor (good stuff) and I could use it on a track day with appropriate pants. Two piece zip-together.

It was advertised as:
Go ! Team Yamaha Moto GP leather Jacket in Size L & XL
and it was cheap, $115.00 US buy it now.

What in the world? So now if something is too good to be true it usually is. I have bought a couple XL things from over seas and their XL people are not the same size as our XL people. So I was a little concerned about that. But no, the fine print says an XL should fit me.

Hrm…

I kept looking. Now if this was a single item from an individual I wouldn’t be so skeptical but it isn’t, there are a few of these things.

Then I find it. In the fine print:

Features: AAA synthetic leather.

Just what is Triple-A synthetic leather anyway? Sounds like plastic to me.

So I asked the seller: Hum, You say leather in the title, but synthetic in the fine print, that’s a little miss leading don’t you think?

The response? “There are lots of different type of leathers. The one we are selling is synthetic PU leather which provides better breatheability and advantages over other leathers such as : Easy to clean with a sponge and water. Impervious to absorption (sweat won’t cause rotting). Highly flexible in cold weather.”

Yeah, that’s plastic. While that’s fine, it’s not good to crash in, which is what this jacket is supposed to be for, to keep you from getting road rash. It’s made from PVC and is very dangerous stuff for motorcycling. This stuff will more than likely melt to your skin in the event of a crash. No good.

Leather is animal hide, like from a cow or better yet a kangaroo if you’re going to drag across the asphalt.

Thanks but no thanks.